Tack Coat How Tack Coat Improves Your Asphalt Paving Inexpensive tack coat can significantly improve the bond between pavement layers, improving pavement strength, reducing surface-course sliding and reducing top-down cracking Application of tack coat to an existing pavement surface is so simple and inexpensive that its real importance is often overlooked. Normally considered an incidental […]
Asphalt Emulsion With Asphalt Emulsions, High Float = High Performer Unlike conventional Bitumen emulsion, after the water evaporates, high floats leave more than just asphalt behind. In the potentially bewildering “alphabet soup” of asphalt emulsion nomenclature, one term stands out: high float asphalt emulsion. Asphalt emulsion may be designated RS, SS, QS, MS, C or AE; can […]
Asphalt Emulsion Application Asphalt Emulsion Application Asphalt emulsions can be used for almost any type of pavement application. They can be used for preventive and corrective maintenance on both asphalt and concrete pavements, stabilizing and reclaiming bases, building structural pavements and recycling worn-out pavements. Recycling with asphalt emulsions is an environmentally attractive way to reduce […]
Emulsions ASPHALT EMULSIONS PROVIDE COHESION, IMPROVE AGED BINDER For failed pavements, full-depth reclamation (FDR) reclaims and treats an entire road structure – including underlying materials – to produce a stabilized base course ready for the overlay. With FDR, an asphalt pavement is pulverized, mixed with a stabilizing agent, shaped or graded, compacted, and topped by […]
Primer and Waterproofing Bitumen Emulsion for Primer and Waterproofing For waterproofing purposes, the bitumen emulsion can simply be sprayed on the considering surface such as the wall, roof, floor, pool, rest room, bath room and all surfaces we do not want to leak. No heating is needed and you just need to disperse it with […]
Mulching Bitumen Emulsion for Mulching The loss of soil by water or wind can be a serious problem in the construction of embankments and flat areas adjacent to highways or in farming land. The most common method of combating this is by vegetation. However, during the period between planting and germination, the seeds may be […]
Cold Mix Bitumen Emulsion for Cold Mix The asphalt surface of the roads can experience erosion, raveling, loss of aggregate,honeycombing, and sulphate attacks over time due to weather conditions such as frost, sunlight, heat, and also road salting, snow removal, as well as the effects of excessive loading and friction, especially caused by tire chains […]
Micro-surfacing Bitumen Emulsion for Micro-surfacing The asphalt surface of the roads can experience erosion, raveling, loss of aggregate,honeycombing, and sulphate attacks over time due to weather conditions such as frost, sunlight, heat, and also road salting, snow removal, as well as the effects of excessive loading and friction, especially caused by tire chains and snowplow blades. […]
Sand Seal Bitumen Emulsion for Sand Seal The asphalt surface of the roads can experience erosion, raveling, loss of aggregate,honeycombing, and sulphate attacks over time due to weather conditions such as frost, sunlight, heat, and also road salting, snow removal, as well as the effects of excessive loading and friction, especially caused by tire chains […]
Slurry Seal Bitumen Emulsion for Slurry Seal The asphalt surface of the roads can experience erosion, raveling, loss of aggregate,honeycombing, and sulphate attacks over time due to weather conditions such as frost, sunlight, heat, and also road salting, snow removal, as well as the effects of excessive loading and friction, especially caused by tire chains […]
- 1
- 2
