Iran Cationic Bitumen Emulsion
Iran Cationic Bitumen Emulsion Manufacturer
CATIONIC BITUMEN EMULSION RS1
We are an unparalleled name in offering a premium quality RS1 Cationic Bitumen Emulsion that is suitable as the binder for penetration macadam and sand seal. This chemical is processed using supreme class chemical compounds as per the set industry norm under utmost favorable condition. We assure our clients that offered chemical is sternly monitored on various parameters to ensure their quality. Further, we offer this chemical in various colors to meet the exact needs and requirements of the clients’. The client can avail this chemical within promised time-frame from us.
Features:
- Good penetration into miniature pores of sub bases
- Easy spray
- Extended breaking
IRAN CATIONIC BITUMEN EMULSION RS2
Clients can avail from us high-quality RS2 Cationic Bitumen Emulsion that is processed from high-grade chemical compounds and latest techniques. Our team of quality controllers tests this bitumen on various defined parameters to ensure its quality. It is also most suited for applications for grouting, penetration and sand sealing. The offered bitumen is available in different packaging options as per the need of the client’ within promised time-frame. Moreover, clients can avail the entire range at industry leading prices.
Features:
- Easy spray
- Low-temperature cure
- High adhesive properties
- Enhances structural strength of layers
- Prevents lateral movements of structural layers
- Water resistant and enhances easy drainage of water
- Provides an impervious layer to prevent water ingress from table below the road layers
Surface Dressing:
It consists of application in one or two coats, each consisting of a layer of bituminous binder sprayed on a previously prepared base, followed by a cover of stone chips rolled in to form a wearing course. RABIT RS2 type cationic bitumen emulsion is ideal for surface dressing on the shoulders and for protection of freshly laid base course. The typical rate of application for two coat surface dressing as per (MORT&H) clause 510.2 is 28-32 kg/10 sq. m.
Grouting:
For the economical construction of low volume roads, a combined base, and wearing courses can be made by an application of RABIT RS2 cationic bitumen emulsion on the laid and compacted aggregates. This application can be carried out even when the stone layer is damp.
Penetration Macadam:
It consists of the construction of one or more layers of compacted crushed coarse aggregates with the alternate application of bituminous binder and key aggregates to be used as the base course on roads, subject to the requirements of the overall pavement design.
Sand Seal:
A bituminous sand application for existing pavement surface to seal the surface and to function as a light-wearing course.
IRAN CATIONIC BITUMEN EMULSION SS2
We are instrumental in offering a wide range of RABIT SS2 Cationic Bitumen Emulsion that is mainly used for road construction. This chemical is processed using supreme class chemicals and latest technology by keeping in mind industry standard. In order to deliver flawless to our clients, our offered chemical is tested on various predefined standards of the industry. The entire range is available in different packaging options at highly competitive prices.
Features:
- Good penetration into miniature pores of sub bases
- Easy spray
- Extended breaking
- Penetrate the cracks & crevices and impart strength to the layers
- Low-temperature curing
- High adhesive properties
- Bonds well to cool, damp substrates/surfaces
- Prevents permeability of atmospheric air to the bottom layer
- Binds loose aggregates together strongly
- Prevents lateral movement of structural layers
- Prevents raveling and rutting
- Water resistant and enhances easy drainage of water
Applications:
Prime Coat: Application of RABIT SS2 to an absorptive surface, designed to penetrate, bond and stabilize this existing surface and to promote adhesion between it and the construction course that follows. The recommended rate of application is 6 to 9 kg per 10 sq. m.
Fog Seal / Crack Seal: Light application of RABIT SS2 to an existing pavement as a seal to inhibit raveling, or to seal the surface, or both. Also used to fill and seal small cracks in existing pavements. Fog seal helps to rejuvenate an old oxidized road surface, thus extending its life. The recommended rate of application is 5 to 10 kg per 10 sq. m.
Slurry Seal: It is a surface treatment for structurally sound roads where the wearing course has deteriorated. Slurry seals are mixtures of fine aggregate, Portland cement filler, bitumen emulsions and additional water. When freshly mixed, they have thick consistency & can be sprayed to a thickness of 1.5 – 5 mm. They may be used to seal cracks, arrest fretting and fill voids and minor depressions. The recommended rate of application is 10 to 12 kg per 10 sq. m.
Premix Seal Coat: Premix is a mixture of fine aggregate, Portland cement filler, bitumen emulsions and additional water. They may be used to seal wide cracks, fill voids and minor depressions. The recommended rate of application is 10 to 12 kg per 10 sq. m.
IRAN CATIONIC BITUMEN EMULSION SS1
Our organization has successfully expanded its business in market owing to the offered elevated quality array of SS1 Cationic Bitumen Emulsion. This chemical is processed under the utmost favorable condition keeping in industry standards. To ensure its quality, this chemical is stringently tested on various parameters. Keeping in mind ever-changing needs of the clients, the offered chemical is available in different packaging option. Moreover, this chemical can be availed within stipulated time-frame from us.
Features:
- Superior penetration into miniature pores of sub bases
- Easy spray
- Extended breaking
- Penetrate the cracks & crevices and impart strength to the layers
- Low-temperature curing
- Prevents permeability of atmospheric air to the bottom layers
- High adhesive properties
- Binds loose aggregates together strongly
- Prevents raveling and rutting
- Water resistant and enhances easy drainage of water
- Compatible with Portland cement
Application:
Cationic bitumen emulsion to an absorptive surface (like low to medium-high Porosity Wet Mix Macadam or Water Bound Macadam), designed to penetrate, plug the capillary voids in the surface, bond and stabilize the existing surface and to promote adhesion between it and the construction course that follows.
The pavements having inadequate priming of Wet Mix Macadam/Water Bound Macadam may have the lesser life due to non-achievement of properties, as mentioned above.
IRAN CATIONIC BITUMEN EMULSION MS
Backed by our rich industry experience, we are successfully ranked amongst the top organization of MS Cationic Bitumen Emulsion. It is used for plant or road mixes with coarse aggregates minimum 80 percent, all of which is retained on 2.36 mm. Our bitumen is processed using sophisticated technology and quality tested chemical compound in conformity with the predefined industry standards. This bitumen can be availed in various colors and can be customized as per information provided by our clients.
Features:
- No heating required
- Environment-friendly
- Economical
- Ease in application
- Bond with existing surface
- Least interference with traffic
- Bonds well to cool, damp surfaces
- Low-temperature cure
- Stable patches
- Resistance to peel off under traffic
- Resistance to stripping by water
- Minimal preparation time for surface repair
- Instant setting and fast development of strength
Other Details:
Maintenance Mix: This high-quality material now makes it possible to fill potholes or carry out patch repair with open-graded cold premix made on-site. The methods typically used for the repair of potholes using asphalt emulsions are throw-and-roll and full-depth removal and replacement. All of these methods involve placing cold mix in the pothole with a shovel and compacting with a truck tire, vibratory plate compactor or steel wheeled roller.
Premix Carpet: For the economical and fast construction of wearing course, the emulsion is used for Premix Carpet. Ministry of Road Transport & Highway (MORT&H) has also recommended the use of emulsion for this application in their clause 506.2. A tack coat is applied on the cleaned surface. The cold mix is prepared as per the above method and spread over the existing surface followed by either liquid seal coat or a premix seal coat.
RABIT (RAHA BITUMEN) supplies and manufacturer the highest quality all grades of Iran Cationic Bitumen Emulsion in correspondence to ASTM D977-12 and EN 13808-2005.
For more information and any inquiries, please contact our sales team on info@rahabitumen.com
